Application Areas

Closed cell. Flexible. Longterm efficient.

Suitable for a wide range of applications: Technical foams made of FEF and PEF are multifunctional optimisers for the technical equipment of buildings. They optimise all technical systems for which they are used - from heating pipes in the home to air conditioning systems in high-rise office buildings, to cooling systems in the supermarket or for water tanks in industrial plants.

Uninsulated hot water and heating pipes are often responsible for high energy losses – particularly when the pipes pass outside the insulated fabric of a building or through unheated rooms.  FEF and PEF insulation materials reduce energy loss from pipework, helping to satisfy energy saving legislation.

Technical insulation for heating and plumbing applications assures a high return on investment: FEF and PEF insulation pay for themselves after only a short time thanks to the consistent energy savings. Completely free from dust and fibres the materials are extremely user friendly.

Building energy optimisation

FEF and PEF insulation materials are optimised to minimise energy losses of technical systems and, thanks to the durability offered by their inherent closed cell structure, the materials retain their energy saving performance over long periods of time.

When correctly installed, the technical insulation pays for itself within a short time: costs for purchase and installation are quickly offset by savings.

Easy installation without risks

FEF and PEF insulation materials are available in a range of different formats – including self-adhesive tubes that are designed to make installation even easier.

learn more ...

Refrigeration and air conditioning technology is gaining increasing importance in the European sphere. The majority of energy consumption in buildings can be attributed to heating, but air conditioning is steadily increasing. According to forecasts, the use of air conditioning will triple by 2030. Starting with the cooling of foods to the air conditioning of residences and offices, the field of application are wide-ranging. In the process, the following applies: Good insulation saves energy. Without insulation there is a risk of increased energy consumption as well as the formation of condensation.

The prevention of condensation is the most important task of insulation in "Refrigeration and air conditioning technology". FEF and PEF foams fulfil this role in the best possible way.

Insulating against condensation

What promises to be refreshing outside in the garden can be a problem indoors. Condensation can cause extensive damage with consequences extending far beyond financial losses. Soaked ceilings, damaged goods, and disrupted production process can all result. Insulation with cellular plastics is a remedy - both at home and in businesses.

If the temperature of a medium, for instance a refrigerant pipe, is below the temperature of the environment, the environmental air cools down. If it drops below the dew point, the water vapour in the air condenses and condensation is the result. Refrigeration insulation is always necessary if the operating temperature of a medium is less than room temperature.

Correctly measuring refrigeration insulation thickness

The primary task of the insulation is to prevent the temperature from falling below the dew point and to block the flow of heat to the medium. Seams and connection points must be carefully sealed in order to ensure that the penetration of moisture is eliminated over the long term. In addition to clean workmanship, the correct insulation thickness is crucial. The following applies: The less heat it conducts, the more efficient and thinner the insulation is.

learn more ...

HVAC systems are very complex and combine three systems with different, but closely intertwined functions. Together they provide full control over the indoor temperature and climate in commercial and industrial buildings. Insulation can increase the energy efficiency of HVAC systems, reducing CO2 emissions and increasing the system life-expectancy.

FEF and PEF foams not only prevent surface condensation, they also feature an integrated water vapour barrier – keeping the insulation dry and effective for long periods of time.

Preventing condensation, keeping insulation effective

When HVAC systems are used to carry cooled air through heated rooms there is the risk of condensation forming on the duct surface. FEF and PEF insulation materials not only prevent condensation by controlling surface temperatures, they also feature a closed cell structure that prevents moisture ingress. By ensuring the insulation structure remains dry, FEF and PEF insulation materials retain their excellent thermal performance over long periods of time.

Healthier insulation for healthier buildings

FEF and PEF insulation materials are dust and fibre free, contain no volatile organic chemicals (VOCs) and actively inhibit the growth of mould and bacteria. This combination of properties ensures FEF and PEF insulation materials do not have any negative contribution towards indoor air-quality when installed on HVAC ductwork.

learn more ...

Solar systems are gaining increasing importance as an alternative energy source - especially in Europe. The most solar power systems worldwide are produced here. In order to ensure that they provide continuously high yields, they should be protected from energy losses. Special pipe insulation has proven to be up to the elevated demands of solar applications.

Weatherproof, UV-resistant and heat-resistant up to 150° C - high temperature EPDM foams provide reliable insulation in solar applications. Thanks to their flexibility, they also insulate lines which are difficult to access and assure constant solar yields.

Demands on solar thermal insulation

Insulation must be even more optimised for solar thermal applications than anywhere else. Since the pipelines are partially exposed to the open air, they are subjected to various weather influences. If the insulation becomes soaked, its conductivity also increases, wherein its thermal performance capacity is reduced. Since moisture can form on its exterior, an additional covering in the outside area alone is often insufficient. Insulation based on synthetic rubber is non-hygroscopic, thanks to its closed-cell structure. It maintains a thermal conductivity equilibrium and retains its insulating capacity even under the influence of moisture.

Resistance against wind and weather

UV radiation, humidity, heat, and other climatic stress can cause a great deal of damage to insulation. Therefore, good weather resistance is extremely important. This can be tested with accelerated artificial weathering of the insulating material. However, since laboratory tests cannot replicate all real influential factors - due to regional differences - additional endurance testing under extreme conditions is recommended.

learn more ...

The extreme temperatures and environments associated with industrial locations present a number of unique challenges and considerations for insulation materials. With higher temperatures comes a higher potential for energy saving but other concerns, like the potential for corrosion under insulation (CUI) and personnel protection often have a greater influence on insulation selection than thermal efficiency alone.

Thanks to their high flexibility, FEF foams insulate a wide variety of components. Due to their long-term thermal performance capability and practical handling, they are ideally suited for use in the industrial sector.

Flexible insulation for complex pipes

Industrial pipework and equipment is complex and can be difficult to insulate using rigid materials. FEF insulation is flexible and standard materials can be easily fabricated on site to fit even the most complex pipes, valves, flanges and other equipment.

Plant energy optimisation

Studies have shown that energy losses can be reduced by up to 30 per cent by insulating components and pipelines. Insulating flanges, valves and fittings can prevent thermal bridges and plays a key role in maximising energy savings.

learn more ...

Noise associated with pipes and ducts can be not only disturbing but also harmful to the health of building occupants. In some countries taking active measures to reduce the levels of nuisance noise is a legal requirement. FEF and PEF insulation materials perform a range of acoustic functions and can help to reduce noise levels within buildings.

In addition to their thermal insulating function, FEF and PEF also provide acoustic benefits - e.g. for pipe systems. The result: better living comfort or increased occupational safety.

Control the noise

Mechanical systems, including air-conditioning, cool and ventilation systems can create an ongoing noise disturbance both inside and outside a building. Commercial businesses are particularly dependent on such systems. FEF and PEF insulation materials can be used to help reduce both the transmission and emission of this nuisance noise.

Contribution to occupational safety

Industrial production and processing locations are an extreme case when it comes to noise levels and acoustic insulation systems are essential to ensure maximum thresholds for noise are not exceeded. Providing pipe systems or tanks of operating systems with acoustic insulation systemshelp to contribute towards occupational safety and reduce the risk of workplace accidents.

learn more ...

Mind the gap(s) to unleash additional saving potential

Energy losses from un-insulated fitting are so great that it’s not possible to “make-up for them in any other way.


Subscribe to our newsletter

Once per month we send you an update of our latest post about the insulation of mechanical services